承插管帽、管箍结构图
 承插管帽、管箍参数表 | 公称通径
Nominal
Diameter | 承插孔
深度
Depth of Socket | 承插孔
直径
Dimension of Socket | 壁厚
Wall Thickness | 管帽顶厚
End Wall Thickness | 中间长度
The length of midst | 中心至承插孔底
Center to Bottom of Socket | | Cmin | Kmin | 双承口
管箍
Coupling | 单承口
管箍
Half-
Coupling | 45°斜三通
Lateral | | A | H | | DN | NPS | Jmin | d1 | 3000
LB | 6000
LB | 9000
LB | 3000
LB | 6000
LB | 3000
LB | E | F | 3000
LB | 6000
LB | 3000
LB | 6000
LB | | Sch80 | Sch160 | XXS | Sch80 | Sch160 | XXS | Sch80 | Sch160 | Sch80 | Sch160 | | 6 | 1/8 | 10 | 10.7 | 3.2 | 3.5 | - | 5.0 | 6.5 | - | 6 | 16 | - | - | - | - | | 8 | 1/4 | 10 | 14.1 | 3.3 | 4.0 | - | 5.0 | 6.5 | - | 6 | 16 | 32 | - | 8 | - | | 10 | 3/8 | 10 | 17.5 | 3.5 | 4.4 | - | 5.0 | 6.5 | - | 6 | 17 | 37 | - | 8 | - | | 15 | 1/2 | 10 | 21.8 | 4.1 | 5.2 | 8.2 | 6.5 | 8.0 | 11.0 | 10 | 22 | 41 | 51 | 11 | 13 | | 20 | 3/4 | 13 | 27.4 | 4.3 | 6.1 | 8.6 | 6.5 | 8.0 | 12.5 | 10 | 24 | 51 | 60 | 13 | 14 | | 25 | 1 | 13 | 34.2 | 5.0 | 7.0 | 10.0 | 9.5 | 11.0 | 14.0 | 13 | 29 | 60 | 71 | 14 | 18 | | 32 | 1.1/4 | 13 | 42.9 | 5.3 | 7.0 | 10.6 | 9.5 | 11.0 | 14.0 | 13 | 30 | 71 | 81 | 18 | 21 | | 40 | 1.1/2 | 13 | 48.3 | 5.6 | 7.8 | 11.2 | 11.0 | 12.5 | 16.0 | 13 | 32 | 81 | 98 | 21 | 25 | | 50 | 2 | 13 | 61.1 | 6.1 | 9.5 | 12.2 | 12.5 | 16.0 | 19.0 | 19 | 41 | 98 | 120 | 25 | 29 | | 65 | 2.1/2 | 16 | 76.9(73.8) | 7.7 | 12.5 | - | 16.0 | 19.0 | - | 19 | 43 | - | - | - | - | | 80 | 3 | 16 | 89.8 | 8.3 | 13.8 | - | 19.0 | 22.0 | - | 19 | 45 | - | - | - | - | | 100 | 4 | 19 | 115.5 | 9.4 | - | - | 22.0 | 28.5 | - | 19 | 48 | - | - | - | - | | | 备注：
承插壁厚外围平均值不低于所列值，最小值于局部区域。
Note:
Average of socket wall thickness around periphery shall be no less than listed values. The minimum values are permitted in localized areas. | |
| 备注：
1、承插壁厚外围平均值不低于所列值，最小值于局部区域。
2、每种规格的上下值分别代表、最小尺寸。
Note:
1、Average of socket wall thickness around periphery shall be no less than listed values. The minimum values are permitted in localized areas.
2、Upper and lower values for each size are the respective maximum and minimum dimensions. |
 |
