.......................................................DO-214 SIDACtor Data........................................................................
The DO-214 SIDACtor is a solid state protection device designed for telecommunications applications such as modems,
line cards, machines, etc.
The SIDACtor is used to help equipment meet various regulatory requirements including: GR 1089, ITU K.20 & K.21,
IEC 950, UL 1459 & 1950 and FCC Part68.
| Part Number* | VDRM Volts | VS Volts | VT Volts | IDRM µAmps | IS mAmps | IT Amps | IH mAmps | CO PF | | P0080S_ | 6 | 25 | 5 | 5 | 800 | 1 | 50 | 100 | | P0300S_ | 25 | 40 | 5 | 5 | 800 | 1 | 50 | 110 | | P0640S_ | 58 | 77 | 5 | 5 | 800 | 1 | 150 | 50 | | P0720S_ | 65 | 88 | 5 | 5 | 800 | 1 | 150 | 50 | | P0900S_ | 75 | 98 | 5 | 5 | 800 | 1 | 150 | 50 | | P1100S_ | 90 | 130 | 5 | 5 | 800 | 1 | 150 | 40 | | P1300S_ | 120 | 160 | 5 | 5 | 800 | 1 | 150 | 40 | | P1500S_ | 140 | 180 | 5 | 5 | 800 | 1 | 150 | 40 | | P1800S_ | 160 | 220 | 5 | 5 | 800 | 1 | 150 | 30 | | P2300S_ | 190 | 260 | 5 | 5 | 800 | 1 | 150 | 30 | | P2600S_ | 220 | 300 | 5 | 5 | 800 | 1 | 150 | 30 | | P3100S_ | 275 | 350 | 5 | 5 | 800 | 1 | 150 | 30 | | P3500S_ | 320 | 400 | 5 | 5 | 800 | 1 | 150 | 30 |
* For individual “SA”, “SB” and “SC” surge ratings, see table below.
Notes:
●All measurements are made at an ambient temperature of 25°C. IPP applies to -40°C through +85°C temperature range.
●IPP is a repetitive surge rating and is guaranteed for the life of the product. |
●Listed SIDACtors are bi-directional. All electrical parameters & surge ratings apply to forward and reverse polarities.
●VDRM is measured at IDRM.
●VS is measured at 100V/µs.
●Special voltage (VS & VDRM) and holding current (IH) requirements are available upon request. |
●Off-state capacitance is measured at 1MHz with a 2 volt bias and is a typical value for “SA” and “SB” product. “SC”
●capacitance is approximately 2x the listed value.
●The off-state capacitance of the P0080SB is equal to our “SC” device.
Surge Ratings
| Series | IPP 2x10µs Amps | IPP 8x20µs Amps | IPP 10x160µs Amps | IPP 10x560µs Amps | IPP 10x1000µs Amps | ITSM 60Hz Amps | dI/dt Amps/µs | | A | | 150 | 100 | 50 | 50 | 20 | 500 | | B | | 250 | 150 | 100 | | 30 | 500 | | C | 500 | 400 | 200 | | 100 | 60 | 500 |
.................................................................................Thermal Considerations.....................................................................................
| Package | Symbol | Parameter | Value | Unit | | | Tj | Junction Temperature Range | -40 to +150 | °C | | | Ts | Storage Temperature Range | -65 to +150 | °C | | DO-214 | Tc | Maximum Case Temperature | +75 | °C | | Rθjc | Thermal Resistance: junction to case | +28 | °C/W | | Rθja | Thermal Resistance: junction to ambient | +90 | °C/W |
.............................................................Package Dimensions...................................................................
....................................................................... Characteristic Curve.........................................................
|
