F-tone Networks Unbalanced analog audio optical transceiver is a single chip stereo analog data fiber optical converter that uses bit-stream converter (ADC) technology. The low power consumption and low voltage requirements make the device ideal for use in low-voltage and low-power portable data and audio devices.

Audio Specification
● Full-size output sine wave, 997 Hz; MCLK = 12.288 MHz. Fs basic probability mode = 48 kHz, SCLK = 3.072 MHz,
● Measurement bandwidth 10hz to 20khz; Fs is high rate mode = 96 kHz,

Features
Multi-format output interface
● Compatible with I2S bus and MSB format
● Serial output up to 24 bits.

Advanced Audio Configuration
● Stereo single - end input configuration
● High linearity, dynamic range and low distortion.

General Functions and Features
● Supports 1 to 32 channels of unbalanced analog audio forward/bidirectional transmission
● Using FPGA, digital coding/decoding and clock recovery technology, high integration and high stability
● Single and multi-mode compatible, multi-mode transmission distance 1KM, single-mode transmission distance 20KM, customized transmission distance of up to 100KM
● LED status indicator to monitor the running status of the device
● Plug and play, no setup required
● Devices are used in pair. Note that devices are distinguished between transmitter and receiver

Technical Indexes

注：本产品有全国产化型号可选
Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.