产品特点：上海轩顼瑞士鲁格RUEGER温度变送器将热电阻、基于热电阻的传感器、热电偶或mV 信号转换成独立于负载的与传感器特性相对应的电流信号。 由于紧凑型产品的设计，变送器可安装在B 型(DIN 43 729) 中（2 区）接线盒中或比更大的接线盒中。

瑞士鲁格RUEGER温度变送器S95的详细资料：

上海轩顼供应瑞士鲁格RUEGER双金属温度计,瑞士鲁格RUEGER压力式温度计,瑞士鲁格RUEGER热电偶/热电阻,瑞士鲁格RUEGER压力表,瑞士鲁格RUEGER温度变送器......

RUEGER S.A.成立于1942年，总部位于Crissier （Lausanne），主要为客户提供温度和压力测量装置。如今公司在拥有170多位雇员。该产品应用范围广泛，例如：食品、医药、化学、通风设施及工业等等。

S95.3 变送器将热电阻、基于热电阻的传感器、热电偶或mV 信号转换成独立于负载的与传感器特性相对应的电流信号。由于紧凑型产品的设计，变送器可安装在B 型（DIN 43 729） 中（2 区）接线盒中或比更大的接线盒中。S95.3 变送器采用HART 协议 V5.7 通讯协议，或手持式HART 通讯编程器对S95.3 变送器进行组态。

Description

S95.3C01 / S95.3C11 is a 4...20 mA loop-powered transmitter for Pt100

sensors.

Either 2-, 3- or 4-wire sensors can be used. For 2-wire sensors an automatic

balancing of the sensor cable resistance is possible with shorted sensor

cable. The cable resistance can be manually configured as well.

Using a PC, the Windows-based Flex-program and a FlexProgrammer

configuring unit, the following parameters can be configured via the output

connectors （2-way communication）: TAG no., number of wires, cable resistance,

error detection level, measuring range/unit, damping, offset and status

indication.

The Flex-program has a datalogging facility enabling the user to monitor

measuring results or calibrate the measuring setup.

S95.3C01 / S95.3C11 is embedded in silicone which makes it resistant to

humid environments.

S95.3C01 / S95.3C11, fitting into the DIN B housing, has a 6 mm center hole

for quick sensor replacement. The spring loaded mounting screws ensure a

safe fastening even in vibrating environments.