PY6106C普通磨料堆积密度测定仪

PY6106CCommon abrasive bulk density tester

一． 参照标准standard：

GB-T3603-83普通磨料堆积密度测定方法要求制作，适用于刚玉及碳化硅8~240号粒度磨料堆积密度的测定

According to GB-T3603-83, The bulk density measuring method of ordinary abrasive materials. It is suitable for the bulk density measurement of the grinding materials of Corundum and silicon carbidee which granularity between 8 and 240

二．参数资料Parameters

漏斗材质：黄铜或不锈钢；锥部高度：82毫米；锥部角度：60~63°；

Funnel material: brass or stainless steel, cone height: 82 mm,

cone angle: 60~63°.

漏斗颈内径：12.7±0.05毫米；漏斗颈长度：12.70.05毫米。

Funnel neck inner diameter：12.7±0.05 mm, funnel neck length: 12.70.05mm.

漏斗锁闭装置是一个直径为35毫米的橡胶球。用两根弹簧固定在漏斗颈的下端。漏斗颈下端至测量筒口的距离为115±2毫米。

The funnel locking device is a rubber ball with a diameter of 35 mm

5.测量筒材质：黄铜；内径：39±0.1毫米； 内深度：83.7±0.1毫米；容积：约100厘米3. Measuring cylinder material: brass, inner diameter: 39±0.1mm, internal depth: 83.7±0.1mm,volume:100 cm3.

6.刮料板材质：黄铜Scraper material: brass

7.选购天平：称重500g，0.1克

8.配置：架台：1套 ；漏 斗： 1只；量杯; 黄铜材质（Φ31mm、25ml）1只;;溢料盘不锈钢1只;毛 刷1只; 说明书；保修卡；合格证。

Equipment: Stand: 1 sets, funnel: 1pcs, measuring cup: brass (Φ31mm,25ml)1pcs,

overflow tray stainless steel 1pcs, brush 1pcs,manual,warranty card, certificate.