This unit has the following configuration:

• 1 input channel, 20 output channel, C config.
• Input and output port type: Both bulkhead on front
• Fiber type: 9/125um
• Return Loss: typical, >65dB
• wavelength range: 1270 to 1670nm
• Connector type: SM, FC/APC

General Info: The JDS Uniphase SB, SC, and SCG series of Benchtop/Rackmount Programmable Switches can be controlled using the front panel keys and a numeric pad or via GPIB and serial RS232 interface. The SCG series ganged input switches allow a single switch instrument to replace multiple switch elements while maintaining low loss. In this series of switches, the inputs are ganged together in a particular sequence and are thus able to offer three different modes of operation (D, E, and F configurations).

The SB and SC series switches are available in four basic configurations, namely C, D, E, and F. The C configuration is a single common input model. The D configuration provides simultaneous connection of a bank of input fibers to output fibers. The E configuration allows any input to be connected to any output while other inputs/outputs are aligned to subsequent/adjacent channels. The switch is non-blocking in this mode and other inputs/outputs are aligned. The F configuration enables one of the inputs to be aligned with an output in a blocking sense, with a result in reduction of available output channels. A low-loss MxN blocking switch is the result.

Key Features

• SB switches can accommodate up to 48 channels

• SC switches can accommodate up to 180 channels

• SB and SC series switches offer up to four input channels

• Low insertion loss, 0.4 dB typical

• Excellent repeatability, 0.003 dB typical

• High return loss,> 65 dB typical

• GPIB and RS232 remote control

• Complies to CE requirements plus UL3101-1 and CAN/CSA-C22.2 No. 1010.1