品牌
其他厂商性质
所在地
| PLANET FT-90x Web Smart Media Converter series supports conversion between 10/100Base-TX and 100Base-FX network. There are SC/SFP/WDM connectors and single-mode/multi-mode media for your needs. The Ethernet signal allows two types of segments to connect easily, efficiently and inexpensively. This converter can be used as a stand-alone unit or as a slide-in module to PLANET Media Converter Chassis (MC-700, MC-1500 and MC-1500R / MC-1500R48). Each Web Smart converter is able to manage through the Web interface. The powerful Web Smart Media Converter supports flow control, QoS, bandwidth control and ingress/egress rate control, etc. The statistics functions of the Web Smart converter help administrators to remotely analyse and count the packet flow of the current Ethernet link. Management function helps reduce the amount of valuable time that a network administrator spends detecting and locating network problems, otherwise it requires visual inspection of cabling and equipment. The Web Smart function also includes the LLR and Loop Back Test. LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. It provides more flexible settings for converters. |
Fiber-optic Networking for ISPs, enterprises, and homes With high performance of data transmission and easy installation, the FT-90x series can build an ISP network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs and FTTB (Fiber to the Building) for small office network environment from enterprises. The Web management helps network administrators to monitor and set up the converter, speed and duplex through Web browsers. |
 |
| � One-channel media conversion between 10/100Base-TX and 100Base-FX � Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX standard � Auto-negotiation for 100Base-TX Half-duplex or 100Base-TX Full-duplex � Supports auto MDI/MDI-X function on RJ-45 Port � Compact size works with PLANET MC family Media Chassis (MC-700/1000R/1500) � TS-1000 OAM � Built-in IP-based Web interface for remote management � Supports PLANET Discovery Utility for deploy management � Layer 2 Smart Feature ?- IEEE 802.3x Full-Duplex Flow-Control and Back-Pressure in Half-Duplex eliminate the loss of packets ?- Supports Maximum frame size to 2Kbytes. ?- Store-and-Forward mechanism ?- IEEE 802.1Q VLAN tagging ?- Two levels of priority queue ?- 802.1p QoS Scheme ?- Bandwidth Control (Kbps) for both Ingress and Egress ?- Broadcast Storm Control to optimize network bandwidth. ?- Ethernet Statistics on both TP and Fiber interface ?- Look Back Test Function (LBT) , Link Loss Return(LLR) ?- Firmware upgrade via HTTP protocol ?- SNMP Trap for alarm notification � LED indicators for easy network diagnosing � Reset Button at the front panel for resetting to factory default � Choice of fiber-connector from SC, WDM, multi-mode / single-mode fiber /100Base SFP |
| 硬件规格 | |
| 国际标准 | IEEE 802.3, 10Base-T IEEE 802.3u, 100Base-TX, 100Base-FX IEEE 802.3x, Flow Control IEEE 802.1p, Class of Service |
| 电口 | 1 x 10/100Base-TX RJ-45 port Auto-negotiation, Auto-MDI/MDI-x |
| 光纤端口 | 1 x 100Base-FX |
| 光纤距离 | FT-902 : SC / Multi-mode / 2km FT-902S15 : SC / Single Mode / 15km FT-902S35 : SC / Single Mode / 35km FT-902S50 : SC / Single Mode / 50km FT-905A : SFP / Vary on transceiver module FT-906A20: WDM SC / Single Mode / 20km FT-906B20: WDM SC / Single Mode / 20km |
| 波长 | FT-902: 1310nm FT-902S15: 1310nm FT-902S35: 1310nm FT-902S50: 1310nm FT-905A: Vary on transceiver module FT-906A20: TX: 1310nm, RX: 1550nm FT-906B20: TX: 1550nm, RX: 1310nm |
| 发射功率（dBm） | FT-902: -14 FT-902S15:0 FT-902S35:-8 FT-902S50:0 FT-905A:NA FT-906A20:-8 FT-906B20:-8 |
| 最小发射功率（dBm） | FT-902: -20 (62.5/125�m), -23.5 (50/125�m) FT-902S15: -20 FT-902S35: -15 FT-902S50:-5 FT-905A:NA FT-906A20:-14 FT-906B20:-14 |
| 接收灵敏度（dBm） | FT-902: -31.8 FT-902S15: -32 FT-902S35:-34 FT-902S50: -35 FT-905A:NA FT-906A20:-31 FT-906B20:-31 |
| 输入功率（dBm） | FT-902: -14 FT-902S15:0 FT-902S35:0 FT-902S50:0 FT-905A: NA FT-906A20:0 FT-906B20:0 |
| 双绞线 | 10/20Mbps for Half/Full-Duplex 100/200Mbps for Half/Full-Duplex |
| 高速光纤 | 200Mbps for Full-Duplex |
| 电缆双绞线 | 10Base-T: 2-pair UTP Cat. 3, 4, 5, up to 100 m 100Base-TX: 2-pair UTP Cat. 5, up to 100 m |
| 光纤电缆 | � 50/125�m or 62.5/125�m multi-mode fiber cable, up to 2km. � 9/125�m single-mode cable, provides long distance for ?15/20/35/50km or longer (very on SFP module) |
| LED 指示灯 | PWR, TP LINK/ACT, TP FDX, TP SPEED Fiber LINK/ACT, Fiber FDX |
| 功率消耗 | 5.5 Watts (maximum) |
| 电源输入 | 5V/2A |
| 尺寸 (W x D x H) | 93 x 69 x 25 mm |
| 操作环境 | Operating temperature: 0 to 50 degrees C Humidity: 10~90% non-condensing |
| 储存环境 | Storage temperature: -25 to 70 degrees C Humidity: 10~90% non-condensing |
| 认证 | FCC Class A, CE Class B |
