10G OEO Converter-,10G OEO Converter深圳市光路在线科技有限公司手机版

详细介绍

10G OEO Converter (3R Repeater)

Standalone 10G OEO Converter (3R Repeater) with SFP+ to SFP+ Slot, XFP to XFP Slot, SFP+ to XFP Slot optional , which uses optical -electricity – optical conversion principle to realize optical signal regeneration , enabling of the optical signal amplification and regeneration , re-timing, and wavelength conversion , with coarse / dense wavelength division multiplexing together to realized WDM transmission . It is now possible to quickly improve communication capacity , expand the bandwidth on present network , while using low-cost, high cost-effective solutions to manage and run the system , easy operation .

Key Features

Logging to syslog server
SNMP read
SNMP trap
Line/Network/Center side and Client/Access side Link Fault Passthrough
Line/Network/Center side and Client/Access side Loopback
Line/Network/Center side and Client/Access side DDM/DMI
Line/Network/Center side and Client/Access side 1310 transceiver
9k+ frame size
Support 2U Rack（16 Slots ）and independent use
support network management（Web SNMP, Console）,
Support in-band management
support ITUT prescribed DWDM/CWDM wavelength
transmission rate:125Mbps~2.5Gbps
Support Jumbo Frame
Transparent Transport and very low delay
support DMI function for SFP fiber module
support hot plugging
Full State Led display
Easy installation

Specification

Performance Data	Technical Indexes

Equipment function	3R Repeater

Transmission Speed	10Gb/s （ 9.95Gb/s-11.35Gb/s ）

Protocols	IEEE802.3ae (10Gbase-SR/LR/ER/ZR/LRM)

Access Type	10G LAN/ 10G WAN

Interface Type	Type A: SFP+ To/From SFP+
	Type B: SFP+ To/From XFP
	Type C: XFP To/From XFP

Transmission	SFP+ module: Up to 80Km
Distance	XFP module: Up to 80Km

Maximum Packet	14,880,950/S
Forwarding Rate

Network	• Card type information
management	• SFP+ or XFP fiber module detection
information:	• SFP+ or XFP fiber module DMI function （ Temperature 、 Voltage	、
	Optical power ）
	• Link status detector
	• Enable/Disabled Loopback test function
	• Enable/Disable PRBS Generator and checker function
	• Rate select （ 10Gbase-Lan or Wan ）
	• Remote card's status monitor （ only in pairs ）
power requirement	Rack-mountable : AC 85 ～ 220V OR DC -48V
	Standalone: AC 220V OR DC -48V
	Power consumption: ≤6W

Work Environment	Operating Temp: 0~ 50 ℃
	Storage Temp: -10~ 70 ℃
	Humidity: 5%~90% （ non-condensing ）

Dimension	Card ： 115mm （ W ） × 78mm （ D ）
	Standalone ： 156mm （ W ） × 128mm （ D ） × 32mm （ H ）

产品简介

详细介绍