进口不锈钢潜水泵

进口不锈钢潜水泵产品简介：
进口不锈钢潜水泵是电机与水泵直联一体潜入水中工作的重要的提水工具，它广泛适用于从深井提取地下水，也可用于河流，水库、水渠等提水工程。主要用于农田灌溉及高原山区的人畜用水，亦可应用于城市、工厂、铁路、矿山、工地供排水等行业。。

进口不锈钢潜水泵使用条件：
 1. 进水节必须浸入动水位以下（1～3）米，一般以（2～3）米为宜。
2. 温度不高于20摄氏度。
3. 水中含砂量（重量比）不超过0.01％。
4. 水中酸碱度（PH值）6.5～8.5。
5. 水中不含有油类。
6. 硫化氢的含量不大于1.0mg/L。
7. 氯离子的含量不大于600mg/L。

进口不锈钢潜水泵材质选择：
 1. 叶轮：不锈钢304,/316。
 2. 泵壳：不锈钢304/316。
 3. 泵轴：不锈钢304。
 4. 电机密封：橡胶密封，O形环，机械密封。

产品特点：
具有结构紧凑、体积小、重量轻、安装、使用、维护方便，运输安全可靠、节约能源、耐腐蚀、环保、扬程高、流量大，采用充水式电机，经久耐用等优点。

参数：

流量：10-200m3/h 扬程：7-60m
口径：50-200mm 转速：1450-2900r/min
功率：0.75-15kw  电压：220/380V
密封：碳化钨，双端面密封 材质：304、316

连接方式：螺纹，法兰

特点

1.陶瓷抗沙结构,耐磨损,使用寿命长;

2.工程塑料叶轮,悬浮设计;

3.分体包装,电机可以通配同功率的泵.减少库存;

4.电容外置,更换电容时不需要把水泵提到井上;方便更换;

5.油浸式电机,可潜水深度120米;

6.水泵使用环境:常温清水;

7.全扬程,全电压,扬程高,适合家用,工业用

德国巴赫BACH：

用户*，信誉*，优质、完善的售后服务是我们产品价值的延伸和对客户利益的重要保证，我公司服务质量管理体系的宗旨是：建立并不断完善科学、合理、高效的服务质量管理体系，公正、准确、及时地完成客户的售后服务质量保障工作，为我公司的客户服务建立良好、全面、充分的服务体系。

选择德国巴赫的四大理由：

1：进步性 持续性

 回顾巴赫在中国的快速进步性 每年均高速增长，可预见一家大型的生产销售企业的建立与发展，也必将在中国的阀门市场乃至机械行业的有所建树。

2：可靠性

 德国巴赫的可靠性与产品之性能是公司经营理念重要组成部分。如期发货，持续经营，高质量， 均经过严格的全面测验。 这就是巴赫为何能高速发展，并且能提供越来越好的高质量产品，服务的原因。

3： 价格

 现代化工厂自动化数控生产线确保阀门与其配件价格合理，品质优良。

和持续不断地投资于人力，设备厂房，为用户提供性价格比高，品质优良的阀门。

4：客户价值观

通过集中采购 可以降低总体的采购成本。

便捷的采购，有助于客户优化配置人力资源，达到精简高效。

借助巴赫充足的库存zui小化客户的库存投入。

高品质的阀门将帮助避免因伪劣产品而导致的停产 停工 误工。

Import stainless steel submersible pump

Introduction to imported stainless steel submersible pump products:

Is imported stainless steel submersible pump motor and pump straight league one important tool to carry water dived into the water, it is widely used in extraction of groundwater from a deep well, also can be used in rivers, reservoirs, canals and other water projects. It is mainly used for the irrigation of farmland and the water of the people and animals in the mountainous areas of the plateau. It can also be used in cities, factories, railways, mines and construction sites.

Conditions for import of imported stainless steel submersible pumps:

1. The water inlet section must be dipped below the moving water level (1 ~ 3) meters, which is generally suitable for (2 ~ 3) meters.

2. The temperature is no higher than 20 degrees Celsius.

3. The amount of sand in water is no more than 0.01%.

4. Acid alkalinity of water (PH value) 6.5 ~ 8.5.

There is no oil in water.

6. The content of hydrogen sulfide is not greater than 1.0mg/L.

7. The content of chloride ion is not greater than 600mg/L.

Material selection of imported stainless steel submersible pump:

1. Impeller: stainless steel 304, / 316.

2. Pump case: stainless steel 304/316.

3. Pump shaft: stainless steel 304.

4. Motor seal: rubber seal, o-ring, mechanical seal.

Characteristics of imported stainless steel submersible pump:

With compact structure, small volume, light weight, easy installation, use and maintenance, transportation safety and reliable, energy saving, corrosion resistance, environmental protection, high head, large flow, USES the water filling machine, durable wait for an advantage.

Imported stainless steel submersible pump parameters:

Flow: 10-200m3 / h yangcheng: 7-60m

Caliber: 50-200mm speed: 1450-2900r/min

Power: 0.75-15kw voltage: 220/380v

Seal: tungsten carbide, double end seal material: 304, 316

Connection mode: thread, flange

Characteristics of imported stainless steel submersible pump

1. Ceramic anti-sand structure, wear and tear, long service life;

2. Engineering plastic impeller, suspension design;

3. The split package, the motor can be matched with the power pump.

4. Capacitance external, no need to refer to the water pump when replacing the capacitor; Convenient replacement;

5. Oil-immersed motor, capable of diving depth of 120 meters;

6. Water pump environment: normal warm water;

7. Full head, full voltage, high lift, suitable for household, industrial use

German BACH BACH imported stainless steel submersible pump:

The user first, credit first, high quality, perfect after-sales service is an extension of the value of our products and the important guarantee for the interests of the customer, my company's service tenet is: quality management system to establish and constantly improve the scientific, reasonable and efficient service quality management system, fair, accurate and timely complete customer after-sales service quality assurance work, for my company's customer service build good, comprehensive, full service system.

Four big reasons to choose Bach in Germany:

1: progressive sustainability

Review Bach rapidly progressive growth each year in China, a large foreseeable production and sales of the establishment and development of the enterprise, will the valve market in China and even the machinery industry.

2: reliability

The reliability of German Bach and the performance of products is an important part of the company's business philosophy. Delivery on schedule, continuous operation, high quality, all passed strict comprehensive test. This is why Bach is developing at a high speed and can provide better and better quality products and services.

3: price

Modern factory high-end automatic numerical control production line to ensure valve and its accessories are reasonable price, good quality.

And continuously invest in the human resources, the equipment workshop, provide the customers with the high quality and high quality valves.

4: customer values

Centralized procurement reduces overall procurement costs.

Convenient procurement, help customers optimize the allocation of human resources, achieve streamlined and efficient.

Minimize customer inventory by using Bach's ample inventory.

High quality valves will help to avoid downtime due to shoddy products.

进口不锈钢潜水泵产品简介：
进口不锈钢潜水泵是电机与水泵直联一体潜入水中工作的重要的提水工具，它广泛适用于从深井提取地下水，也可用于河流，水库、水渠等提水工程。主要用于农田灌溉及高原山区的人畜用水，亦可应用于城市、工厂、铁路、矿山、工地供排水等行业。。

进口不锈钢潜水泵使用条件：
 1. 进水节必须浸入动水位以下（1～3）米，一般以（2～3）米为宜。
2. 温度不高于20摄氏度。
3. 水中含砂量（重量比）不超过0.01％。
4. 水中酸碱度（PH值）6.5～8.5。
5. 水中不含有油类。
6. 硫化氢的含量不大于1.0mg/L。
7. 氯离子的含量不大于600mg/L。

材质选择：
 1. 叶轮：不锈钢304,/316。
 2. 泵壳：不锈钢304/316。
 3. 泵轴：不锈钢304。
 4. 电机密封：橡胶密封，O形环，机械密封。

产品特点：
具有结构紧凑、体积小、重量轻、安装、使用、维护方便，运输安全可靠、节约能源、耐腐蚀、环保、扬程高、流量大，采用充水式电机，经久耐用等优点。

参数：

流量：10-200m3/h 扬程：7-60m
口径：50-200mm 转速：1450-2900r/min
功率：0.75-15kw  电压：220/380V
密封：碳化钨，双端面密封 材质：304、316

连接方式：螺纹，法兰

特点

1.陶瓷抗沙结构,耐磨损,使用寿命长;

2.工程塑料叶轮,悬浮设计;

3.分体包装,电机可以通配同功率的泵.减少库存;

4.电容外置,更换电容时不需要把水泵提到井上;方便更换;

5.油浸式电机,可潜水深度120米;

6.水泵使用环境:常温清水;

7.全扬程,全电压,扬程高,适合家用,工业用

德国巴赫BACH：

用户*，信誉*，优质、完善的售后服务是我们产品价值的延伸和对客户利益的重要保证，我公司服务质量管理体系的宗旨是：建立并不断完善科学、合理、高效的服务质量管理体系，公正、准确、及时地完成客户的售后服务质量保障工作，为我公司的客户服务建立良好、全面、充分的服务体系。

选择德国巴赫的四大理由：

1：进步性 持续性

 回顾巴赫在中国的快速进步性 每年均高速增长，可预见一家大型的生产销售企业的建立与发展，也必将在中国的阀门市场乃至机械行业的有所建树。

2：可靠性

 德国巴赫的可靠性与产品之性能是公司经营理念重要组成部分。如期发货，持续经营，高质量， 均经过严格的全面测验。 这就是巴赫为何能高速发展，并且能提供越来越好的高质量产品，服务的原因。

3： 价格

 现代化工厂自动化数控生产线确保阀门与其配件价格合理，品质优良。

和持续不断地投资于人力，设备厂房，为用户提供性价格比高，品质优良的阀门。

4：客户价值观

通过集中采购 可以降低总体的采购成本。

便捷的采购，有助于客户优化配置人力资源，达到精简高效。

借助巴赫充足的库存zui小化客户的库存投入。

高品质的阀门将帮助避免因伪劣产品而导致的停产 停工 误工。

Import stainless steel submersible pump

Introduction to imported stainless steel submersible pump products:

Is imported stainless steel submersible pump motor and pump straight league one important tool to carry water dived into the water, it is widely used in extraction of groundwater from a deep well, also can be used in rivers, reservoirs, canals and other water projects. It is mainly used for the irrigation of farmland and the water of the people and animals in the mountainous areas of the plateau. It can also be used in cities, factories, railways, mines and construction sites.

Conditions for import of imported stainless steel submersible pumps:

1. The water inlet section must be dipped below the moving water level (1 ~ 3) meters, which is generally suitable for (2 ~ 3) meters.

2. The temperature is no higher than 20 degrees Celsius.

3. The amount of sand in water is no more than 0.01%.

4. Acid alkalinity of water (PH value) 6.5 ~ 8.5.

There is no oil in water.

6. The content of hydrogen sulfide is not greater than 1.0mg/L.

7. The content of chloride ion is not greater than 600mg/L.

Material selection of imported stainless steel submersible pump:

1. Impeller: stainless steel 304, / 316.

2. Pump case: stainless steel 304/316.

3. Pump shaft: stainless steel 304.

4. Motor seal: rubber seal, o-ring, mechanical seal.

Characteristics of imported stainless steel submersible pump:

With compact structure, small volume, light weight, easy installation, use and maintenance, transportation safety and reliable, energy saving, corrosion resistance, environmental protection, high head, large flow, USES the water filling machine, durable wait for an advantage.

Imported stainless steel submersible pump parameters:

Flow: 10-200m3 / h yangcheng: 7-60m

Caliber: 50-200mm speed: 1450-2900r/min

Power: 0.75-15kw voltage: 220/380v

Seal: tungsten carbide, double end seal material: 304, 316

Connection mode: thread, flange

Characteristics of imported stainless steel submersible pump

1. Ceramic anti-sand structure, wear and tear, long service life;

2. Engineering plastic impeller, suspension design;

3. The split package, the motor can be matched with the power pump.

4. Capacitance external, no need to refer to the water pump when replacing the capacitor; Convenient replacement;

5. Oil-immersed motor, capable of diving depth of 120 meters;

6. Water pump environment: normal warm water;

7. Full head, full voltage, high lift, suitable for household, industrial use

German BACH BACH imported stainless steel submersible pump:

The user first, credit first, high quality, perfect after-sales service is an extension of the value of our products and the important guarantee for the interests of the customer, my company's service tenet is: quality management system to establish and constantly improve the scientific, reasonable and efficient service quality management system, fair, accurate and timely complete customer after-sales service quality assurance work, for my company's customer service build good, comprehensive, full service system.

Four big reasons to choose Bach in Germany:

1: progressive sustainability

Review Bach rapidly progressive growth each year in China, a large foreseeable production and sales of the establishment and development of the enterprise, will the valve market in China and even the machinery industry.

2: reliability

The reliability of German Bach and the performance of products is an important part of the company's business philosophy. Delivery on schedule, continuous operation, high quality, all passed strict comprehensive test. This is why Bach is developing at a high speed and can provide better and better quality products and services.

3: price

Modern factory high-end automatic numerical control production line to ensure valve and its accessories are reasonable price, good quality.

And continuously invest in the human resources, the equipment workshop, provide the customers with the high quality and high quality valves.

4: customer values

Centralized procurement reduces overall procurement costs.

Convenient procurement, help customers optimize the allocation of human resources, achieve streamlined and efficient.

Minimize customer inventory by using Bach's ample inventory.

High quality valves will help to avoid downtime due to shoddy products.