2W水用黄铜、不锈钢电磁阀的工作原理，2W水用黄铜、不锈钢电磁阀里有密闭的腔，在的不同位置开有通孔，每个孔都通向不同的油管，腔中间是阀，两面是两块电磁铁，哪面的磁铁线圈通电阀体就会被吸引到哪边，通过控制阀体的移动来档住或漏出不同的排油的孔，而进油孔是常开的，液压油就会进入不同的排油管，2W水用黄铜、不锈钢电磁阀然后通过油的压力来推动油刚的活塞，活塞又带动活塞杆，活塞竿带动机械装置动。这样通过控制电磁铁的电流就控制了机械运动Valve Co., Ltd. Shanghai Zhi wide installation 2W water with brass, stainless steel solenoid valve 10 requirements

1, the water solenoid valve with working medium should be clean and free particulate impurities, dirt and pieces of the electromagnetic valve on the filter surface, requiring regular clean.

2, when the solenoid valve malfunction, in order to prompt isolation solenoid valves, and ensure the normal operation, it is best to install a bypass device.

3. When you install the solenoid valve coil up and maintain the vertical position, the solenoid valve arrow or mark shall be consistent with the flow of the pipeline can not be installed in a splash of water or the leak.

4, in the piping system, installed in the branch on the way solenoid valve diameter should be less than the main pipe valve diameter.

5, before installing the solenoid valve, piping must be cleaned. It is recommended to install a filter before the valve, steam trap piping installation.

6, the valve can not be installed in the lower recesses pipe, so as to avoid condensation of water vapor, precipitation and other impurities in the valve and impede action.

7, it can not be used in explosion hazardous areas.

8, in the absence of sufficient rigidity pipeline, it is recommended to use the valve before the pipeline bracket, so as not to cause vibration when the solenoid valve is working.

9, prior to installation, pay attention to see the product label, carefully read the instruction manual to determine whether the product meets the conditions of use.