BAY51-Q-防爆全塑荧光灯-,BAY51-Q温州日昇照明电气有限公司手机版

详细介绍

一、BAY51-Q防爆全塑荧光灯适用范围

1. 爆炸性气体环境危险场所：1区、2区；
2. 可燃性气体、蒸气级别：ⅡA、ⅡB、ⅡC；
3. 温度组别：T1~T6；
4. 户内、户外(IP65)。
5. 可配装20W、40W单脚或双脚双管荧光灯。

1. For the dangerous sites with explosive air mixture: 1division, 2division;
2. Flammable gas, steam class: ⅡA、ⅡB、ⅡC;
3. Temperatures classification: T1~T6;
4. Indoor and outdoor (IP65);
5. Access to fit can get the single- or dual-foot dual-fluorescent lamps of 20W or 40W.

二、BAY51-Q防爆全塑荧光灯性能特点

1. 壳体采用耐冲击、耐老化、阻燃、抗静电、强度高的SMC工程塑料模压成形或采用不锈钢板拉伸成形，外形美观、大方。
2. 灯罩采用聚碳酸酯注塑而成，透光性好，并能承受强撞击。
3. 外壳采用密封式结构，具有防水、防尘、防腐蚀等优点。
4. 内装电子镇流器和电感镇流器，及充砂型电子镇流器和电感镇流器,具有短路和开路保护功能,针对灯管的老化效应和漏气现象有预防电路,使灯管能正常工作,并且高效COS

≥0.95节能单脚荧光灯和双脚荧光灯可供用户随意选用。
5. 防爆型灯具具有开盖断电*的防爆电器联锁装置。
6. 电缆布线。
7. 符合GB3836-2000、IEC60079、GB12476.1-2000、IEC62241标准要求。

1. The case body adopts impact-resistance, aging resistance, fire inhibiting, antistatic and high strength SMC engineering plastic.
2. The lampshade is casted by polycarbonate, with high transpareny and impact withstanding ; umbrella;
3. The shell is sealed, with performances of water-proof dust-proof, corrosion-proof;
4. Inner fitted is electronical ballast and inductive ballast and own special sand-filled ballast. The single- or dual-foot fluorescent lamp is for choice.
5. The light has the interlock device that can cut power in case of capping.
6. Cable wiring;
7. Suitable for GB3836-2000、 IEC60079、GB12476.1-2000、IEC61241 standard request.

三、技术参数

电压 Voltage (V)	防爆标志 Explosion-proofing maker	防护等级 Protection category	防腐等级 Corrosion- proofing grade	电缆外径 Cable's outside diameter (mm)
AC220±10%	Exed qⅡ CT6	IP65	WF2	Φ10

BAY51-Q

产品简介

详细介绍