讲解关于滑触线操作安全注意事项介绍

(a) on the characteristics of the parallel collector.
由于同相集电器时并联连接，所以任意时候只要有一个集电器与带电滑线连接，其它的集电器和与之接触的物体均处于带电状态
Because when the in-phase collector connected in parallel, so any time as long as there is a collector and charged slide wire connection, collector and other objects in contact with are in charged state
（b）典型的错误操作有：
(b) typical mistake operation:
因集电小车跨接转龙段和主龙段，而转龙段或主龙段的其中一段是处于断电维修状态。维修时建议关断主供电电源并锁死开关
Because the collector car jumper to the long period and the main long segment, and to the long segment or principal dragon section a section of which is in a power down state of repair. Suggestions off main power supply switch and lock repair
因带电检查集电器。
Check for charged collector.
因集电器放错相
Because the collector is put in the wrong phase
因集电器未正确放入滑触线
Because the collector is not properly placed in sliding contact line