品牌
代理商厂商性质
广州市所在地
SPECIFICATIONS | PLX1802 |
| STEREO MODE, both channels driven * |
8 ohms |
|
4 ohms |
|
2 ohms EIA 1 kHz 1% THD | 900 W |
| BRIDGE MONO MODE * |
8 ohms |
|
4 ohms 1 kHz 1% THD | 1800 W |
| |
Signal to Noise (20 Hz - 20 kHz) | -107 dB |
Input Sensitivity @ 8 ohms | 1.28 Vrms |
Gain @ 8 ohms | 32 dB |
Output Circuitry | AB |
Distortion (SMPTE-IM) | Less than 0.02% |
Typical Distortion |
|
Frequency Response | 20 Hz-20 kHz, -0.5 dB |
Damping Factor | Greater than 500 |
Input Impedance | 20k ohms balanced |
Input Clipping | 11 Vrms (+21 dBu) |
Cooling | Variable-speed fan, rear-to-front air flow |
Input Connectors, each channel | 3-pin XLR and 1/4" TRS balanced |
Output Connectors, each channel | Neutrik® NL4 Speakon® and Touch-proof binding posts |
Rear Panel Switches | Input Configuration: Bridge/Stereo/Parallel |
Front Panel Controls | Detented Input Attenuator: 0 to ∞ dB |
Front Panel Indicators | Clip: Red LED |
PROTECTION | |
Amplifier Protection | Full short circuit, open circuit, thermal, infrasonic, ultrasonic, and RF protection |
Load Protection | On/off muting, DC-fault power supply shutdown |
Infrasonic | -3 dB, 5 Hz |
DC fault | Power supply shutdown |
Ultrasonic | -3 dB, 85 kHz |
Short Circuit | Cutback |
Thermal | Muting at 90° C |
Over Current | Active clip limiting |
High Line | Standard +15%, survive +25% |
Low Line | -33% |
PHYSICAL | |
Dimensions |
|
Weight | |
Agency Approvals | CE, FCC, cUL, UL |
* CE versions may have up to 12% (0.5 dBw) less power due to special construction to meet EN
CURRENT CONSUMPTION | PLX1802 | |
1/8 Power (pink noise) | 8 ohms | |
1/3 Power (pink noise) | 8 ohms | |
Full Power | 8 ohms | |
Notes | Long term, active-limited to |