TETRA Repeater TR-400

Product Description

The Fiber Optic Repeater is designed to solve problems of weak terminal signal in the place that is far away from the Base Transceiver Station (BTS) and has fiber optic cable network underground.
The system consists of two parts: Master Unit and Remote Unit. The Master unit captures the BTS signal via Donor antenna to BTS, then converts it into optic signal and transmits the amplified signal to the Remote Unit via fiber optic cable. The Remote unit will reconvert the optic signal into RF signal and provide the signal to the areas where signal coverage is inadequate. And the terminal signal is also amplified and retransmitted to the BTS via the opposite direction.

Features

Ø  Remote Unit - Aluminum-alloy casing with IP55 protection has high resistance to dust, water and corroding
Ø  TX/RX control and alarm messages can be transmitted via one fiber optic cable
Ø  Adopting WDM module to realize long-distance transmission
Ø  Modules structure, Full-duplex & dual-port design, and built-in power supply, easy for maintenance and installation
Ø  One Donor Unit can support up to 4 Remote Units to maximize utilization of fiber optic cable

Applications
 

To expａnd signal coverage or fill signal blind area where FM signal is weak or unavailable.
Ø  Outdoor: Airports, tourism regions, golf courses, tunnels, factories, mining districts, villages
Ø  Indoor: Hotels, exhibition centers, basements, shopping malls, offices, parking lots

Application Diagram

 

Technical Specifications

Item				Specifications
Frequency Range				410-415MHz	420-425MHz
Bandwidth				5MHz
Output Power		Remote unit		0dBm±2dB	30/33/37/40/43dBm±2dB
		Master unit	RF Cable to BTS	--	--
			Wireless to BTS	27/30/33/37dBm±2dB	0dBm±2dB
Max Gain	Remote unit			50dB±3dB	55dBm±3dB
	Master unit		RF Cable to BTS	--	--
			Wireless to BTS	55dB±3dB	55dB±3dB
Gain Adjust Range & Step				31dB,1dB Step
ALC Range				≥30dB
Noise Figure				≤5dB
Group Delay				≤2.5μs
In-bａnd Ripple				≤±1.5dB
Intermodulation attenuation				-45dBc
Spurious Emission				≤-36 dBm /30kHz at 9kHz-1GHz ≤-30 dBm /1MHz at 1G-12.75GHz
VSWR				≤1.5
Impedance				50Ω
RF Connector				N-Female
Fiber Connector				FC/APC or FC/PC
Fiber Mode				Single mode
Optic Wavelength				1310 and 1550nm
Total Optical Power				0dBm
Operation Temperature				-25~+55°C
Optic Input Power of Remote				≥-10dBm
Relative Humidity				≤95% (Non Condensing)
Power Supply				Master Unit: 220-240 AC 50/60Hz
				Remote Unit: 220-240 AC 50/60Hz
Weight				Master Unit: ≤13Kg
				Remote Unit: ≤14Kg
Dimensions				Master Unit: 329*250*88mm
				Remote Unit: 428*328*175mm
Power Consumption				Master Unit: ≤220W
				Remote Unit: ≤270W
Chassis & Protection level				Remote Unit:IP55
Monitor (Optional)				Local monitoring: LCD display keyboard operation RS232 or USB Remote monitoring: MODEM SMS messaging or RJ45
Marking				CE
Standards				EN60950-1, EN 301489-1-5, EN50385, EN302 561, ETSI TS 101 789-1.