ABP（KBB）-60安全型防爆白炽灯 防爆白炽灯，安全型防爆白炽灯，ABP-100防爆白炽灯，KBB防爆白炽灯

ABP （KBB） safety explosion-proof incandescent lamp
防爆白炽灯,ABP安全型防爆白炽灯,KBB矿用防爆灯
Incandescent lamp, ABP safe explosion-proof incandescent lamps, KBB explosion-proof lamp

一、用 途
A, use
本产品根据国家标准GB3836.1～2-83有关规定制造.适用于煤矿井下及类似场所，在额定电压至127V的电路中作照明用。
This product according to the relevant provisions of national standards GB3836.1 ~ 2-83. Suitable for coal mine and other similar places, lighting in the circuit of rated voltage at 127V.
ABP（KBB）-60安全型防爆白炽灯规格及技术参数
Two, technical parameters and specifications
1．型号含义
1 types of meaning
KB B — □
KB B -.
额定功率
Rated power
白炽灯
Incandescent lamp
矿用
Mine
2.技术参数
2 technical parameters
型号 额定电压 额定功率 防爆标志 灯座代号 电缆外径
Rated voltage rated power type explosion-proof mark lamp code of outer diameter of cable
KBB-□ 127V 60W/100W dⅠ E27 Φ8～Φ15
KBB- - 127V 60W/100W d I E27 Phi 8 to 15
ABP（KBB）-60安全型防爆白炽灯结构概述
Three, the structure overview
防爆灯外壳采用铝硅合金及钢化玻璃罩制成隔爆型，内部可装入白炽灯安装可采用吸顶式、吊杆式、吸壁式、链式等几种形式，进线口螺纹为G3/4"，接线腔内外设有接地螺钉。
Explosion-proof lamp shell adopts aluminium silicon alloy and toughened glass cover made of explosion-proof, internal loadable incandescent lamps are used for mounting ceiling type, derrick, absorbing several forms of wall, chain, inlet thread for G3/4 ", inside and outside the chamber is provided with a grounding screw connection.
ABP（KBB）-60安全型防爆白炽灯安装使用与维修
Four, installation and repair
1．安装时，电线通过密封圈引入接线盒端子上，合盖后
1 installation, wire through the sealing ring into the terminal box terminal, lid after
用螺栓紧固，然后把钢管及接线盒连接牢固。
Bolt, and then put the steel pipe and the junction box is connected firmly.
2．更换灯泡时打开玻璃罩盖，注意须断开电源，且灯炮冷却后进行。
2 replacement bulbs when open the glass cover, attention must disconnect the power, and the light bulb after cooling.
3．定期检查灯具是否完好，若需维修按GB3836有关规定进行。若维修有困难可与制造厂。
3 regular inspection lamp is intact, if need to repair in accordance with the relevant provisions of GB3836. If the repair is difficult and manufacturing plant.