 Stabilization Evaluation Equipment （STEVE） is designed for qualitative analysis of image stabilizing systems under reproducible, realistic conditions.
STEVE is calibrated to provide the best performance at the most significant frequency / ampiltude combination of the human tremor of 4 Hz and 0.2 degrees. The whole range of available frequencies and angles of the movement corresponds to the properties of the typical tremor. For the initial setup, the mounting stage allows to adjust the camera position. The movement parameters of the two axes can be controlled separay. Moving about a single axis （yaw or pitch） is possible, as well as simultaneous operation in parallel or antiparallel way. Both, simple sine shaped motion and individual curves （e.g. to simulate a real handshake） can be realized and logged.
To determine the influence of the handshake it is neccessary to combine STEVE with a test chart. We recommend our AF-Box.
 ...Download the STEVE data sheet........ ..Download the STEVE user manual........ ..ユーザーマニュアル
Camera weight
| up to 5 kg
| Moving frequency
| 0.1 - 12 Hz （optimized for 4 Hz）
| Moving angle
| 0.1 - 0.5 degrees （optimized for 0.1 - 0.2 degrees）
| Motion type
| sine wave or individual curve
| Mean position error
| < 5% within optimized range
| Standard accessory
| camera mounting stage, controller box, USB cable
| | Optional accessory | Digitus | Minimal system requirements
| Microsoft Windows XP SP3, USB interface
|
|
