手持测向天线IsoLOG 3D 9060（9kHz-6GHz）

3D手持式测向天线(一款)

IsoLOG 3D Mobile 9060（9kHz-6GHz）

One Antenna for all your needs, no need to change an antenna again anymore

一款天线，满足您的所有需求，无需再次更换天线

特点：

Usable with any spectrum analyzer 适用于任何频谱分析仪

High gain and low Noise 高增益、低噪声

Built-in bypass pre-amplifier 内置带通前置放大器

Manual or automatic axis switching 手动或自动X/Y/Z轴切换

Battery or DC powered 内置电池供电或直流电源供电

6h battery run-time 内置电池连续工作时间6小时

Only 350g weight 重量350g

IsoLOG 3D天线简介

The new IsoLOG 3D Mobile, Aaronia’s latest development, is a very light and small isotropic antenna which is compatible to any spectrum analyzer. It just works “on the fly” and is a suitable plug and play solution for 3D measurements in limited time frames.

安诺尼IsoLOG 3D Mobile手持测向天线，是一款非常轻巧小型的天线，可以搭配各种频谱分析仪兼容的各向同性天线。即插即用，非常快捷进行3D测量。

The antenna requires no software installation, no power connection and no hardware changes. It is connectable via the N (male) connector to any analyzer or oscilloscope.

该款天线不需要安装软件，不需要连接电源，没有硬件变化，仅通过N（公）连接器即可连接各种频谱分析仪分析仪或示波器。

The IsoLOG 3D Mobile is available in 2 versions with an ultra-wide frequency coverage from 9kHz up to 3GHz (IsoLOG 3D Mobile 9030) or 6GHz(IsoLOG 3D Mobile 9060 and 9060 PRO).

IsoLOG 3D Mobile提供3款超宽频率范围的型号，9kHz到3GHz（IsoLOG 3D Mobile 9030）和9kHz-6GHz（IsoLOG 3D Mobile 9060 和 9060 Pro）。

Each IsoLOG 3D Mobile includes an internal, re-chargeable battery, offering a runtime of approx. 6 hours, and a switchable low noise bypass pre-amplifier. The integrated amp allows measurementsof very low-powered signals.Thus, used in bypass mode,the antenna is still usable for high field-strengths. The control of the antenna is done via USB or via manual antenna selection mode,requiring no USB connection。

IsoLOG 3D Mobile内置一个可反复充电的电池，提供大约6小时连续运行时间，以及可切换的低噪声带通前置放大器。内置前置放大器可测量非常弱的信号，在直通模式模式下，天线依然可用于测量高场强的信号。天线可通过USB连接电脑，通过配套的软件远程控制，或不通过USB线连接电脑软件，直接手动操作控制天线切换。

Aaronia also integrated an ultra fast adjustable „chopper“ function. Using special, glitch free RF switches this feature offers an automatic endless antenna rotation/selection with a switching duration of up to 50kHz. This feature transforms the IsoLOG 3D Mobile into a fully functional 3D antenna without the need of any USB software control.

该款天线还集成了超快速切换的天线方向X/Y/Z轴的功能。通过一个特定的开关，即可完成X/Y/Z三轴循环切换，切换频率50kHz。该功能可实现控制IsoLOG 3D Mobile天线，而不需要通过USB软件控制。

Antenna Gain天线增益

IsoLOG 3D天线外观示

The handy form factor and small weight of only 350g predestine the IsoLOG 3D Mobile for portable measurements. Following picture shows the layout and functions of the antenna:

便携、轻巧，重量仅350g，非常方便用于便携式测试， 下图是天线布局和功能：

Scope of Delivery标配清单

IsoLOG 3D Mobile antenna / IsoLOG 3D测向天线，内置可充电电池

Watertight & shock-proof transport case / 防水防震运输箱

SMA to N Adapter for connection of SMA cables / SMA-N转接头，用于连接SMA电缆

Pistol grip with minature-tripod function / 手握式微型三脚架

Battery charger &power supply / 电源适配器

Accessories选配件

1m / 5m / 10m SMA-Cable

High quality special SMA cable to connect the IsoLOG Antenna with various test equipment like SPECTRAN Spectrum-Analyzers. Choose between 3 different cables:

高品质SMA电缆，连接各种测试设备，如SPECTRAN频谱分析仪， 3种可选的电缆：所有版本：SMA（公头）/ SMA（公头）

1m标准SMA电缆（RG316U）

5m LowLoss SMA电缆（低损耗）

10m LowLoss SMA电缆（低损耗）

Heavy multifunctional Pistol Grip多功能重型夹

Recommend for the usage of the IsoLOG 3D Mobile, e.g. connected

to larger tripods. Quick and easy change of antenna polarization.

推荐选用与IsoLOG 3D Mobile搭配使用，可连接到较大的三脚架，快速方便地更换天线极化方向。

SMA-N转接头（标配包含）

This special high quality adapter allows operation of all IsoLOG Mobile antennas with any spectrum-analyzer with SMA connector.

Nominal impedance 50 Ohms.

Layout: SMA socket (female) / N plug (male).

高品质转接头，方便与各种SMA接头的仪器连接。

SMA插座（母头）/ N插头（公头）

Aluminum tripod 三脚架

Height adjustable, high stability. Recommended for use with IsoLOG Mobile antennas for long time measurements! Max. height: 105cm

高度可调，稳定性高。推荐IsoLOG天线选配使用，高度：105厘米