1x20 Flexgrid Wavelength Selective Switch

Increasing demａnd for network services is driving the introduction of new transmission formats and channel management technologies that facilitate the efficient use of optical bandwidth for extremely high data rates.

While the introduction of coherent techniques such as Dual-Polarization Quadrature Phase Shift Keying (DP-QPSK) enables 100Gb/s transmission within a 50 GHz channel, traffic with higher data rates, including 400 Gb/s and 1 Tbit/s signals of the future, are not expected to fit inside 50 GHz wide channels. These higher data rates require that channel spacings are flexible and can be increased to allow the use of new transmission formats.

F-tone Networks's F-toneFlexgrid technology provides dynamic control of the channel center frequency with 6.25 GHz resolution and channel width with 12.5 GHz resolution within a Wavelenth Selective Switch (WSS), the key element in a Reconfigurable Optical Add/Drop Multiplexer (ROADM). Once deployed, channel plans are configurable 'on-the-fly', meaning that channel bandwidths can be adjusted to most efficiently carry future demands as they arise. As frequency slot edges are aligned to the 12.5 GHz ITU grid, Flexgrid offers full backwards compatibility with both the standard 100 GHz and 50 GHz ITU grids, as illustrated below.

Flexgrid is available on all F-tone Networks WSS product lines.

特性：

• Flexgrid Dynamic Channel Width Control
  • 6.25 GHz Center Frequency Resolution
  • 12.5 GHz Width Resolution
  • 12.5-500 GHz Width
• Dynamic Intra-Channel Attenuation Control
  • 6.25 GHz Resolution
  • 0-20 dB Range
• LCoS Switching Technology
• 4-20 Mux/Demux Ports
• 4.8 THz Frequency Range (C-bａnd or L-band)

应用：

• Broadcast & Select ROADM Architectures
• 10-400+ Gb/s Telecom Networks
• Dynamic Gain Equalization
• Multi-carrier Superchannels
• Alien Wavelength Routing
• ITU Standard 50 GHz and 100 GHz Channel Plans

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.