西门子PM240功率模块6SL3210-1PE22-7UL0

西门子PM240功率模块6SL3210-1PE22-7UL0

相似图像SINAMICS 功率模块 PM240-2 未过滤 带集成式制动斩波器 380-480V+10/-10% 三相交流 47-63Hz 重过载功率：7.5kW 当 200% 3S，150% 57S， 100% 240S；环境温度 -10 至 +50°C；功率 轻过载：11kW 当 150% 3S，110% 57S， 100% 240S；环境温度 -10 至 +40°C 355x 140x 165（高x宽x深）,FSC 防护等级 IP20 不带控制单元和 操作单元 批准从 CU 固件- 版本 4.6版起已获得许可

​河南兆阳公司在经营活动中精益求精，具备如下业务优势：
 SIEMENS 可编程控制器1、SIMATIC S7 系列PLC：S7-200、S7-1500、S7-1200、S7-1500、S7-300、S7-400、ET-200逻辑控制模块 LOGO！230RC、230RCO、230RCL、24RC、24RCL等
2、SITOP直流电源 24V DC 1.3A、2.5A、3A、5A、10A、20A、40A可并联.3、 HMI  触摸屏TD200 TD400C K-TP OP177 TP177,MP277 MP377,
      SIEMENS 交、直流传动装置
4、 交流变频器 MICROMASTER系列：MM420、MM430、MM440、G110、G120.
MIDASTER系列：  MDV
5、全数字直流调速装置 6RA23、6RA24、6RA28、6RA70、6SE70系列
       SIEMENS 数控 伺服电机
6、SINUMERIK:801、802S 、802D、802D SL、810D、840D、611U、S120
      系统及伺服电机，力矩电机，直线电机，伺服驱动等备件销售。
西门子PLC模块    西门子变频器    西门子触摸屏  西门子电线电缆  西门子数控系统等
​

SINAMICS G120是一种包含各种功能单元的模块化变频器系统。基本上包括：

1、控制单元 (CU)

2、电源模块 (PM)

CU在多种可以选择的操作模式下对 PM 和连接的电机进行控制和监视。通过控制单元，可与本地控制器以及监视设备进行通讯。电源模块的功率范围为 0.37 kW 至 250 kW。

SINAMICS G120优点简介

1、 具有很多创新功能

具有用于安全相关机器与系统的 Safety Integrated 功能，能够向输入电源进行再生反馈以节约电能，采用新的冷却方式

2、组态和调试更加快速

使用 SIZER 和 STARTER 工具；并使用基本操作员面板 (BOP) 和微型存储卡进行数据备份

3、 一致的解决方案

通过全集成自动化 (TIA)，取得从 SINAMICS 直至自动化级别的一致性

SINAMICS G120技术数据

380 – 690 V ± 10三相交流，0.37 - 250 kW

SINAMICS G120 –典型用途

SINAMICS G120尤其适合用作整个工业与贸易领域内的通用变频器，例如，可在汽车、纺织、印刷、化工等领域以及一般高级应用（如输送应用）中使用。

河南兆阳自动化科技有限公司销售西门子千万余产品 尽新老顾客您来询价订货采购，欢迎您来兆阳公司，谢谢您的光临！ 
连系人  ：邵经理
电   ：191+ 39 98+ 27 30        同微号​

4.额定功率范围为0.5518.5 kW，结构紧凑，调试快速，操作简便，易于维护，并具有高度集成的特点。

5.该紧凑型变频器是同等级变频器中功率密度较高的产品，可作为一个模块直接安装，而不会损失功率，其安装空间比市场上的常规系统低30，而功率密度则高出40。

针对小型控制柜的应用，Sinamics G120C型变频器专门进行了优化，方便靠近或直接在机器设备上安装。这些应用仅需要速度可控的简单驱动装置，无需占用太大空间。       

该设备允许用户通过一个存储卡插槽，实现参数拷贝，并进行快速调试；用户也可用一个操作员面板来取代盲盖板实现简单调试；还可以借助一个电脑USB接口对该变频器进行参数设置。

此外，Sinamics G120C型变频器还包含Sinamics平台上被用户广为接受的控制步骤，无传感器的矢量操作可实现对感应电机节能运行的控制。设备还支持西门子的Profibus总线系统，通过USS现场总线协议、RTU模式和CAN总线，也可将其直接集成到其他广泛采用的通讯结构中。

西门子PM240功率模块6SL3210-1PE22-7UL0​

​概述

PM240‑2 Power Modules – 0.55 kW to 250 kW (0.75 hp to 400 hp), IP20 degree of protection

PM240‑2 Power Modules, frame sizes FSA to FSG (with Control Unit and Operator Panel)

The PM240‑2 Power Modules are based on a new hardware platform. This permits an increase in power density as well as the application of innovative cooling concepts (push-through technology) with especially high requirements in terms of control cabinet cooling.

Furthermore, the PM240-2 Power Module is also suitable for use in safety-oriented applications. In conjunction with a fail-safe Control Unit, the drive can be transformed into a Safety Integrated Drive (see section Control Units).

The PM240‑2 Power Modules in frame sizes FSA to FSF are available both with and without an integrated line filter class A of compact design for 200 V, 400 V and 690 V line voltages (except PM240‑2 frame sizes FSD to FSF: 200 V). The PM240‑2 Power Modules in frame size FSG are available with an integrated line filter Category C3 of compact design for 400 V and 690 V line voltages, also with integrated line filter Category C2 for a line voltage of 400 V. In addition, a DC link reactor is integrated in the PM240‑2 Power Modules, frame sizes FSD to FSG, and therefore no line reactor is required.

The PM240-2 Power Modules with integrated line filter class A are suitable for connection to TN supply systems. Power Modules without integrated line filter can be connected to grounded TN/TT systems and non-grounded IT systems.

The PM240‑2 Power Module has an integrated braking chopper. In generating mode, the excess energy of the DC link can be dissipated by means of an optional braking resistor.

The permissible cable lengths between converter and motor are limited (for max. permissible cable lengths, see Integration). Longer cables can be used if output reactors are connected (see section Load-side power components).

Push-through variant

Example: PM240‑2 Power Modules, degree of protection IP20, push-through variant, frame sizes FSD to FSF (with Control Unit and Operator Panel)

The push-through variants in the frame sizes FSA to FSF allow the cooling fins of the Power Modules to be pushed through the rear panel of the control cabinet. Push-through variants should be used in applications where the amount of power loss generated inside the control cabinet itself must be minimized.

Shield plates and shield connection kits are available for use in the wiring installation of Control Units and Power Modules to ensure that it complies with EMC guidelines.
For more information, see Shield connection kits for Control Units and Power Modules in section Supplementary system components.

PM250 Power Modules – 7.5 kW to 90 kW (10 hp to 125 hp), IP20 degree of protection

PM250 Power Modules, frame sizes FSC to FSF

PM250 Power Modules are suitable for a large number of applications in general mechanical engineering. Any braking energy is directly fed back into the line supply (four-quadrant applications – a braking chopper is not required).

The PM250 Power Module features an absolutely unique technology – Efficient Infeed Technology. This feature provides the ability to feed energy back into the supply system in the generator mode (electronic braking) so that the energy is not converted into heat in a braking resistor. This saves space in the control cabinet. The time-consuming process of dimensioning the braking resistor and the expense of the extra wiring are eliminated. Furthermore, heat losses in the control cabinet are reduced.

Further, the innovative circuit design reduces the line harmonics. There is no need to use an optional line reactor at the supply infeed. This saves space and costs for engineering and procurement.

The permissible cable lengths between converter and motor are limited (for max. permissible cable lengths, see Integration). Longer cables can be used if output reactors are connected (see section Load-side power components).

Frame sizes FSD to FSF of the PM250 Power Modules are available both with as well as without integrated line filter class A.

For frame size FSC of the PM250 Power Module with an integrated line filter class A, an additional base filter of class B is available for achieving class B (see section Line-side components).

The PM250 Power Module is also designed for safety-oriented applications. In conjunction with a fail-safe Control Unit, the drive can be transformed into a Safety Integrated Drive (see section Control Units).

The PM250 Power Modules with integrated line filter class A are suitable for connection to TN supply systems. Power Modules without integrated line filter can be connected to grounded TN/TT systems and non-grounded IT systems.

Note:

Shield plates and shield connection kits are available for use in the wiring installation of Control Units and Power Modules to ensure that it complies with EMC guidelines.
For more information, see Shield connection kits for Control Units and Power Modules in section Supplementary system components.

集成

All Power Modules have the following connections and interfaces:

• PM‑IF interface to connect the Power Module to the Control Unit. The Power Module also supplies power to the Control Unit using an integrated power supply
• Motor connection using screw-type terminals or screw studs
• 2 PE/protective conductor connections
• Shield connection plate

Connection example for PM240‑2 Power Modules, frame sizes FSA to FSC, with or without integrated line filter

Connection example for PM240‑2 Power Modules, frame sizes FSD to FSG, with or without integrated line filter

Connection example for PM250 Power Modules with or without integrated line filter

Power and DC link components that are optionally available depending on the Power Module used​